Modelling, Measurement and Control
Series D. Production Engineering and Management, Organization, Human and Social Problems
Editors: Christian Berger Vachon
Publication Fequency: 1 volume per year
Modelling, Measurement and Control (MMC) is an annual international journal series including four journals: Series A: General Physics and Electrical Applications, Series B: Mechanics and Thermics, Series C: Chemistry, Geology, Environment and Bioengineering, and Series D: Production Engineering and Management, Organization, Human and Social Problems.
This is an open access journal series, which means that all content is freely available without charge. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author.
Inquiries and manuscript submissions may be sent to: email@example.com.
Instructions for Authors (AMSE periodicals)
Except for some survey papers, the papers must be original (research, development, results). Papers should be related to Modelling and/or Simulation. Then, authors are requested to indicate (if possible) to which AMSE series their paper is intended, although Referees may suggest another choice. Submissions are in English. All contributions are assessed by Referees. Also, don’t forget to quote MS (manuscript) number in all mails (number is given at the first submission). In order to allow a correct reproduction of the paper, submissions must comply with the following requirements:
*Titles (character size being 16), and numbered section headings, should be meaningful and concise, typed in bold characters and not in capital letters; (the rest is in Times 12, or equivalent). Skip a line between title and authors and between authors and affiliation addresses.
*Authors’ names and institution full addresses must be clearly indicated. Institution addresses should be complete; they are placed below the authors’ names and before the abstract. Do not give telephone numbers. E-mail addresses are compulsory, following the institution addresses. Give the initial letter (only and always) of given names.
*An Abstract (in English) of less than 150 words must precede the text; it follows immediately (on the first page) the institution addresses. Then Key Words should be indicated [between abstracts and text].
*Text follows immediately (on the first page) key words. Recommended full size for the text is 10 to 20 pages. Papers should be justified and organised in one column. The text must be typed (“Camera Ready”), on standard A4 size (21x29.7 cm). Finally, papers will be reduced, by the Editor (for the printed journals), to A5 format (beware of small characters). Font must be Times 12 (or equivalent size for the characters). Don’t use colours; papers are printed in black and white only. Use 1.5 spacing between the lines. The text must be about 17 cm width and 25 cm high with almost equal margins (margin will be slightly increased at the top of the first page: 4 cm); thus, margins should be set as indicated: right = 2 cm, left = 2 cm, top = 2.7 cm, bottom = 2 cm. Also, a (good) discussion and a conclusion are expected. Conclusion and discussion should not be in the same section. Please, number the pages (bottom of page).
*Tables and figures, with their captions (in normal font), are included in the text at the correct place and receive numbers, which appear in the text. Photographs (and colours) should be avoided. Don’t make too small figures with too small indications (the publisher reduces the format from A4 to A5 before printing).
*All Footnotes should be placed at the end of the paper, sorted by their reference number.
*A good care in the References must be introduced. Each citation must begin on a new line using the following format: Authors’ family names (preceded by the initial letter of the given name); Title, Year; THEN: Publisher, City, Country (for book) OR journal name, volume, pages, (for journals). Also, for conference proceedings indicate the place (town, country), the date (month, year), the meaning of acronyms (if any) and the pages of the paper in the proceedings (the reader should have access to the information if needed). References must be up to date and a minimum of 10 references is expected. Bibliography follows immediately the conclusion (or possible acknowledgements). Also, don’t forget to cite AMSE papers in the references; this is necessary for our recognition.
*Postal address: (if needed): AMSE Secretary/ 14 Avenue Berthelot/ 69 007 LYON (FRANCE)
Do not send special delivery mail, such as registered mail, to this address.
*Copyrights: In case of acceptance, copyrights are transferred to AMSE (see website).
*Submission: Papers can be submitted for regular processing or for electronic processing (indicate your choice).
Papers should be sent (electronic paper: Word 2003 recommended) to the General Secretary’s e-mail address:
Dr C. Berger-Vachon: firstname.lastname@example.org
-Regular processing: papers will be printed and posted to Referees (the Editorial Committee will find the referees).
-Electronic processing (accelerated reviewing): please suggest 4 RELIABLE referees and indicate their electronic and postal addresses, not from your university, and one at least should not be from the main author’s country; please make sure the Referees will accept the reviewing if requested. Finally, two referees will be selected among them.
*AMSE website: www.amsemodelling.com
Important information from AMSE Board about periodical publication:
Many letters to AMSE deals with the following topic. So, let us make a statement about it.
Publications in AMSE journals are free of charge. Consequently, people working for AMSE are volunteers and they must do , first, their compulsory duties in their institutions.
This may lead to some delay in handling AMSE mail and submissions. The following delays should be regarded as normal:
*Acknowledgement letter (after a submission) : 1½ to 2 month,
*Reply from the Referee: another 4 months.
Unfortunately, sometimes, Referees forget to answer and added recalls have to be done lengthening the procedure and making AMSE work much heavier and the delay longer. And, finally, in the worst case, no reply come after the recall and the paper is taken by the AMSE Board; this is exceptional and really unfair and unpleasant.
After acceptance, papers are forwarded to Spain for printing. Contents of edited journals are indicated on our website.
So please, don't send information requests within these periods (mostly with repeated e-mail messages) as it may even more lengthen the delays.
Thank you for your collaboration and for accepting these rules which help our community to publish at a low cost
The General Secretary
We strongly suggest you regularly check your spam folder for AMSE notifications. Update your 'Safe Senders' list to ensure that emails from AMSE are not filtered into your spam folder.
Are you a new AMSE user? Please select register from the section USERS at the top and enter the requested information.
Are you an existing AMSE user? If you are already registered as an author or a reviewer, please do not register again. Enter at the top your username and password and then click the appropriate log in button. If your email or other address details change, you can update your AMSE account by selecting "Modify my User's Data" after you log in, from the section USERS.
Are you an author and reviewer for our journal? You will be able to perform both these activities with your AMSE account. Select log in from the menu at the top and enter your username and password, and select "My Articles in process" or "Articles for review" from the section PUBLICATIONS at the top and access the requested information.
Have you previously registered on this site but now forgotten your password? Simply click "I forgot my password" at the top. Enter your email address in the popup window that appears and click "Remember Password". AMSE will then email you your username and password.
Do you wish to change your username or password? Simply log in to AMSE and select "Modify my User's Data", from the section USERS.
Browse in this journal:
|Mathematical modeling and predicting the current trends of human population growth in Bangladesh||Pag. 1|
|Hironmoy Mondol, Uzzwal Kumar Mallick, Md. Haider Ali Biswas|
|Symmetric volatility forecast models for crude oil price in Nigeria||Pag. 8|
|Onyeka-Ubaka J.N., Agwuegbo S.O.N., Abass O., Imam R.O.|
|Feed-in-tariffs – an Australian case study||Pag. 15|
|Nithya Saiprasad, Akhtar Kalam, Aladin Zayegh|
|Empirical analysis on multiple regression modeling method of compositional data||Pag. 25|
|Zhihui Zhang, Zhepeng Zheng, Chenxia Suo, Yong Yang|
|Modelling spline truncated and local polynomial for inflation sectors in Indonesia||Pag. 30|
|Suparti, Alan Prahutama, Rukun Santoso|
|A fuzzy inventory model with imperfect items and backorder with allowable proportionate discount||Pag. 39|
|Rojalini Patro, Sujit Acharya, Mitali Madhusmita Nayak, Milu Acharya|
|Study of the Impact Slice Open Block Type Village on Surrounding Traffic Capacity||Pag. 1|
|Yuan Duan, Juan Chen, Geng Zhang, Guoyi Hu (China )|
|The Research on Contrast between Dan System of Chinese Wushu and Belt System of Karate||Pag. 16|
|Jidong Lin (China )|
|The Analysis of the Sharing of Bicycles||Pag. 26|
|C. Feng, X. Li, J. Liang (China)|
|Optimal Policies for Deteriorating Items with Preservation and Maintenance Management When Demand is Trade Credit Sensitive||Pag. 36|
|Poonam Mishra, Azharuddin Shaikh (India )|
|Two Warehouse Inventory Model for Imperfect Quality Items with Allowable Proportionate Discount||Pag. 55|
|Rojalini Patro, Milu Acharya, Mitali Madhusmita Nayak (India )|
|Recalibrating Science & Technology Education for Environmental Sustainability- Re-Orientation of Text Books||Pag. 72|
|Samir K. Saha, Suvanjan Bhattacharyya (India )|
|Condition Monitoring of Single Phase Induction Motor Using Fuzzy Logic Scheme||Pag. 80|
|Sudeep Samanta, Pushpak Seal, Jitendra Nath Bera (India )|
|Question Item Quality Analysis in Learning Content Management Systems (LCMS): A Case Study Based Approach||Pag. 89|
|Nilay Kr. Nag, Nabamita Majumder, Anjan Goswami (India )|
|Smart Glass for Blind People||Pag. 102|
|Ankita Bhuniya, Sumanta Laha, Deb Kumar Maity, Abhishek Sarkar, Suvanjan Bhattacharyya (India )|
|Voice Input Transport Enquiry System for the Benefit of Society||Pag. 111|
|Rahul Roy, Shramona Chakraborty, Saptarshi Dey, Sutanu Sarkhel, Tuheli Bhattacharya (Algeria )|
|Economic order quantity model for non-instantaneously deteriorating items under order-size-dependent trade credit for price-sensitive quadratic demand||Pag. 1|
|Nita H. Shah, Mrudul Y. Jani (India)|
|Shedding light on mutual funds and performance evaluative criteria in Iran||Pag. 20|
|Haniyeh Amiri (Spain)|
|Optimization of different control parameters of a cold storage using Taguchi methodology||Pag. 1|
|N. Mukhopadhyay, R. Das (India)|
|Efficiency research on ecological technology innovation of enterprises in view of low carbon strategy based on two-stage chain DEA model and Tobit regression||Pag. 10|
|Yao L.X.; Liao L.P (China)|
|Optimum taxation policy using maximum-entropy method||Pag. 32|
|Dipankar Dutta, Sanat Kumar Majumder (India)|
|MinxEntp principle and its application in regional and urban Pplanning||Pag. 47|
|S. Bhadra, S. K. Majumder (India)|
|Factors influencing the decision to migrate among rural smallholder arable crop farm households in South Eastern Nigeria||Pag. 62|
|J. C. Nwaru, O. R. Iheke (Nigeria)|
|Optimal pricing and ordering policies for deteriorating items with two-level trade credits under price-sensitive trended demand.||Pag. 1-8|
|Nita, H.; Dushyantkumar, G.; Digeshkumar, B.|
|Solve the more general travelling salesman problem.||Pag. 9-23|
|Feng, C.; Liang, J.|
|Economic sustainability of integrated hydropower development of Ero-Omola Falls, Kwara state, Nigeria.||Pag. 24-51|
|Lawal, K.M.; Sule, B.F.; Ogunlela, A.O.|
|A proposed intelligent decision support system for marketing planning in industrial enterprises.||Pag. 52-61|