Series A. General Physics and Electrical Applications

Modelling, Measurement and Control

Series A. General Physics and Electrical Applications

ISSN: 1259-5985

Editors: Christian Berger Vachon

Publication Fequency: 1 volume per year

Modelling, Measurement and Control (MMC) is an annual international journal series including four journals: Series A: General Physics and Electrical Applications, Series B: Mechanics and Thermics, Series C: Chemistry, Geology, Environment and Bioengineering, and Series D: Production Engineering and Management, Organization, Human and Social Problems.

This is an open access journal series, which means that all content is freely available without charge. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author.

Inquiries and manuscript submissions may be sent to:

Instructions for Authors (AMSE periodicals)

Except for some survey papers, the papers must be original (research, development, results). Papers should be related to Modelling and/or Simulation. Then, authors are requested to indicate (if possible) to which AMSE series their paper is intended, although Referees may suggest another choice. Submissions are in English. All contributions are assessed by Referees. Also, don’t forget to quote MS (manuscript) number in all mails (number is given at the first submission). In order to allow a correct reproduction of the paper, submissions must comply with the following requirements:

*Titles (character size being 16), and numbered section headings, should be meaningful and concise, typed in bold characters and not in capital letters; (the rest is in Times 12, or equivalent). Skip a line between title and authors and between authors and affiliation addresses.

*Authors’ names and institution full addresses must be clearly indicated. Institution addresses should be complete; they are placed below the authors’ names and before the abstract. Do not give telephone numbers. E-mail addresses are compulsory, following the institution addresses. Give the initial letter (only and always) of given names.

*An Abstract (in English) of less than 150 words must precede the text; it follows immediately (on the first page) the institution addresses. Then Key Words should be indicated [between abstracts and text].

*Text follows immediately (on the first page) key words. Recommended full size for the text is 10 to 20 pages. Papers should be justified and organised in one column. The text must be typed (“Camera Ready”), on standard A4 size (21x29.7 cm). Finally, papers will be reduced, by the Editor (for the printed journals), to A5 format (beware of small characters). Font must be Times 12 (or equivalent size for the characters). Don’t use colours; papers are printed in black and white only. Use 1.5 spacing between the lines. The text must be about 17 cm width and 25 cm high with almost equal margins (margin will be slightly increased at the top of the first page: 4 cm); thus, margins should be set as indicated: right = 2 cm, left = 2 cm, top = 2.7 cm, bottom = 2 cm. Also, a (good) discussion and a conclusion are expected. Conclusion and discussion should not be in the same section. Please, number the pages (bottom of page).

*Tables and figures, with their captions (in normal font), are included in the text at the correct place and receive numbers, which appear in the text. Photographs (and colours) should be avoided. Don’t make too small figures with too small indications (the publisher reduces the format from A4 to A5 before printing).

*All Footnotes should be placed at the end of the paper, sorted by their reference number.

*A good care in the References must be introduced. Each citation must begin on a new line using the following format: Authors’ family names (preceded by the initial letter of the given name); Title, Year; THEN: Publisher, City, Country (for book) OR journal name, volume, pages, (for journals). Also, for conference proceedings indicate the place (town, country), the date (month, year), the meaning of acronyms (if any) and the pages of the paper in the proceedings (the reader should have access to the information if needed). References must be up to date and a minimum of 10 references is expected. Bibliography follows immediately the conclusion (or possible acknowledgements). Also, don’t forget to cite AMSE papers in the references; this is necessary for our recognition.

*Postal address: (if needed): AMSE Secretary/ 14 Avenue Berthelot/ 69 007 LYON (FRANCE)

Do not send special delivery mail, such as registered mail, to this address.

*Copyrights: In case of acceptance, copyrights are transferred to AMSE (see website).

*Submission: Papers can be submitted for regular processing or for electronic processing (indicate your choice).

Papers should be sent (electronic paper: Word 2003 recommended) to the General Secretary’s e-mail address:

Dr C. Berger-Vachon:

-Regular processing: papers will be printed and posted to Referees (the Editorial Committee will find the referees).

-Electronic processing (accelerated reviewing): please suggest 4 RELIABLE referees and indicate their electronic and postal addresses, not from your university, and one at least should not be from the main author’s country; please make sure the Referees will accept the reviewing if requested. Finally, two referees will be selected among them.

*AMSE website:

Important information from AMSE Board about periodical publication:
Many letters to AMSE deals with the following topic. So, let us make a statement about it.
Publications in AMSE journals are free of charge. Consequently, people working for AMSE are volunteers and they must do , first, their compulsory duties in their institutions.
This may lead to some delay in handling AMSE mail and submissions. The following delays should be regarded as normal:
*Acknowledgement letter (after a submission) : 1½ to 2 month,
*Reply from the Referee: another 4 months.
Unfortunately, sometimes, Referees forget to answer and added recalls have to be done lengthening the procedure and making AMSE work much heavier and the delay longer. And, finally, in the worst case, no reply come after the recall and the paper is taken by the AMSE Board; this is exceptional and really unfair and unpleasant.
After acceptance, papers are forwarded to Spain for printing. Contents of edited journals are indicated on our website.
So please, don't send information requests within these periods (mostly with repeated e-mail messages) as it may even more lengthen the delays.
Thank you for your collaboration and for accepting these rules which help our community to publish at a low cost
The General Secretary

We strongly suggest you regularly check your spam folder for AMSE notifications. Update your 'Safe Senders' list to ensure that emails from AMSE are not filtered into your spam folder.

Are you a new AMSE user? Please select register from the section USERS at the top and enter the requested information.

Are you an existing AMSE user? If you are already registered as an author or a reviewer, please do not register again. Enter at the top your username and password and then click the appropriate log in button. If your email or other address details change, you can update your AMSE account by selecting "Modify my User's Data" after you log in, from the section USERS.

Are you an author and reviewer for our journal? You will be able to perform both these activities with your AMSE account. Select log in from the menu at the top and enter your username and password, and select "My Articles in process" or "Articles for review" from the section PUBLICATIONS at the top and access the requested information.

Have you previously registered on this site but now forgotten your password? Simply click "I forgot my password" at the top. Enter your email address in the popup window that appears and click "Remember Password". AMSE will then email you your username and password.

Do you wish to change your username or password? Simply log in to AMSE and select "Modify my User's Data", from the section USERS.

Browse in this journal:

Volume 91 / Issue 4 / 2018

Volume 91 / Issue 3 / 2018

Modeling of semiconductors refractive indices using hybrid chemometric model Pag. 95
Luqman E. Oloore, Taoreed O. Owolabi, Sola Fayose, Muideen Adegoke, Kabiru O. Akande, Sunday O. Olatunji
Power loss reduction using distributed generation Pag. 104
Rajesh K. Samala, Mercy R. Kotapuri
Modelling and analysis of a hybrid controller applied to the ultracapacitor based solar powered electric vehicle Pag. 114
Raghavaiah Katuri, Srinivasarao Gorantla
Experimental investigations on grid integrated wind energy storage system using neuro fuzzy controller Pag. 123
Krishnan Suresh, Attuluri R.Vijay Babu, Perumal M. Venkatesh
BDC-based wind energy storage for multimode operating system Pag. 131
Vellarivelli B. Thurai Raaj, Krishan Suresh, Ramasamy Arulmozhiyal
An enhanced reactive power dispatch with finest location of dg using PSO algorithm Pag. 139
Dsnmrao, Niranjan Kumar
Improvement of multi-machine power system stability using artificial intelligent power system stabilizer Pag. 145
Suman Machavarapu, Venu G.R. Mannan, Venkata R.R. Puilpaka
Design and analysis of PWM controller to reduce torque ripples in BLDC motor drive Pag. 152
Cherukuri N.N. Rao, Gadwala D. Sukumar

Volume 91 / Issue 2 / 2018

Volume 91 / Issue 1 / 2018

Existence and stability of collinear equilibrium points in elliptic restricted three body problem with radiating primary and triaxial secondary Pag. 1
Usha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan Ashutosh Usha Tadepalli, Narayan AshutoshUsha Tadepalli, Narayan Ashutosh (India)………………………..…………….......................……………….......1
Experimental research on capacitor discharge machining of insulating ceramics Pag. 9
Haifeng Zhang, Jinghua Zhou, Jianyong Liu (China)
Math function based controller applied to electric/hybrid electric vehicle Pag. 15
Raghavaiah Katuri, Srinivasa R. Gorantla (India)
Evaluation of block-oriented models use for the purpose of robust controllers synthesis Pag. 22
Jhonathan C. Resende, Márcio F. S. Barroso, Valter Jr. de Souza Leite (Brazil)
Behaviour based navigational control of humanoid robot using genetic algorithm technique in cluttered environment Pag. 32
Asita K. Rath, Dayal R. Parhi, Harish C. Das, Priyadarshi B. Kumar (India)

Volume 90 / Issue 4 / 2017

Volume 90 / Issue 3 / 2017

Development of DBEA Compressed Data Transfer System over Power Line Pag. 262
Subhra J. Sarkar, Palash K. Kundu, Gautam Sarkar (India)
Development of Embedded Power System Data Management System Pag. 279
Subhra J. Sarkar, Palash K. Kundu, Gautam Sarkar (India)
Contactless Measurement of Voltage Harmonics on Low Voltage Multi-conductor Cables Pag. 296
César D. P. Crovato, Cristian F. Santos, Tiago A. Pereira, Roberto C. Leborgne, Valner J. Brusamarello (Brazil)

Volume 90 / Issue 2 / 2017

Calculating Reflectivity of Fiber Bragg Grating for Different Apodization Techniques Pag. 116
Payel Halder, Arpan Deyasi (India )
Electromagnetic Antenna Based on Transmit-receive Crossing Coil Pag. 125
Jun Zhang, Yangcheng Xu, Yunbo Li, Fenghao Yang, Yanqing Wu (China )
Analysis and Design Optimization for Cascade Electromagnetic Transmitter Operating in High Frequency Pag. 142
Jianzhi Ding, Yiming Zhang (China )
Techno-economic Feasibility of PV-wind-diesel-battery Hybrid Energy System in a Remote Island in the South China Sea Pag. 162
Jiaxin Lu, Weijun Wang, Yingchao Zhang, Sheng Ye (China )
Analysis of the Fault Property of the Sensors in H-Bridge Converter Pag. 183
Xiaodong Yang, Wenyong Duan, Jiangang Wang, Guowen Hu (China )
A Fall Detection Model Based on Asymmetrical Support Vector Machine Pag. 196
Congcong Li, Guifa Teng, Lihua Li (China )
SOPC-based Magnet Flux Measurement System Pag. 209
Baohai Yang, Changchun Yang, Qin Xu, ZeLiang Liu, Jing Luo, Ningli Liang (China )
Decoupling Control of Bearingless Synchronous Reluctance Motor Based on SVM Inversely Optimized by ACO Pag. 221
Xiaoyan Diao, Huangqiu Zhu (China )
Study on the Resistance and Capacitance Characteristics of Concrete under Electro-osmosis Pag. 234
Xiaodong Shen, Jun Lu, Xiao Xu, Meng Li, Shengbo Li, Yajiao Liu (China )
Pentaprism Measurements of Large Flat Mirrors Pag. 246
Li Yuan, Xiaohui Zhang, Xu He (China )

Volume 90 / Issue 1 / 2017

Volume 89 / Issue 1 / 2016

Modelling and simulation of electric power transmission line current as wave Pag. 1
G. Leonidopoulos (Greece)
Numerical modal analysis of a suspen dome with carbon fibber reinforced polymer tensegrity system Pag. 13
IfeOlorun Olofin, Ronggui Liu (China)
Effects of impactor and other geometric parameters on impact behavior of FRP laminated composite plate Pag. 25
Md. Muslim Ansari, Anupam Chakrabarti, M Ashraf Iqbal (India)
Design of concentric circular antenna arrays for sidelobe reduction using differential evolution algorithm Pag. 45
G. S. K. Gayatri Devi, G.S.N.Raju, P.V.Sridevi (India)
Pattern synthesis using accelerated particle swarm optimization Pag. 58
P.A. Sunny Dayal, G.S.N. Raju, S. Mishra (India)
Analysis of S-X band slot coupled wave guide junction Pag. 77
P. Ujjvala Kanthi Prabha, G.S.N. Raju, V.K.Varma Gottumukkala (India)
Radial active magnetic bearing control using fuzzy logic Pag. 92
Nabila. Boubaya, Belhamdi Saad, Morad. Maazouz (Algeria)
Harmonic analysis of a saturated iron-core superconducting fault current limiter using Jiles-Atherton hysteresis model Pag. 101
D. Sarkar, D. Roy, A. B. Choudhury, S. Yamada (India)
Dynamic performance analysis of the induction motor drive fed by current-source based on Ansoft Pag. 118
Zhen Guo, Jiasheng Zhang, Changming Zheng, Zhenchuan Sun (China)
The calculation for the induced magnetic field of ferromagnetic objects based on scalar potential integral equation Pag. 130
Qiang Bian, Xiang-jun Wang, Yu-de Tong, Guo-hua Zhou (China)
Modeling and simulation of grid-connected inverter based on out-loop power control and experimental verification Pag. 143
Peifeng Xu, Kai Shi, Dean Zhao, Rongke Liu, Yi Zhu (China)
Design and implementation of the power battery management system of photovoltaic power generation based on bi-directional DCDC equalization control Pag. 156
Chunyan Xu, Chengjun Xie, feng Jiang, Jinyan Zhao (China)
Multidimensional coordinated optimal dispatching method for AC/DC hybrid distribution network Pag. 173
XH Wang, NS Chen, TJ Pu, SJ Xu, CP Wang (China)
Research of a high-precision high-power-factor switching power supply Pag. 188
Zhi Cui, Xianpu Cui (China)
New residual current compensation method for single-phase grounding fault in power network based on capacitive current detection and analysis Pag. 205
JIA Chenxi, Qiu Wenning, Pu Xinzhen (China)
Analyses on the dynamic characteristic of power coupling mechanism during engine starting in hybrid electric vehicle Pag. 224
Liao Lianying, Zuo Yanyan, Zeng Xianren, Meng Haodong, Yang Zhongkai (China)
Multi-objective optimal scheduling method for power system based on wind power accommodation Pag. 244
Guanwu Lin, Xiaolan Wang (China)

Volume 88 / Issue 1 / 2015

Volume 87 / Issue 3 / 2014

Volume 87 / Issue 2 / 2014

Volume 87 / Issue 1 / 2014

Other issues

      Copyright © AMSE 2017   I   Terms & Conditions   I   Privacy Policy