Series A. General Mathematics

Advances in Modelling

Series A. General Mathematics

ISSN: 1258-5769


Editors: Christian Berger Vachon

Publication Fequency: 1 volume per year

Advances in Modelling and Analysis (AMA) is an annual international journal series including four journals: Series A: General Mathematics, Series B: Signal Processing and Pattern Recognition, Series C: Automatic Control, and Series D: Computer Science and Statistics.

This is an open access journal series, which means that all content is freely available without charge. Users are allowed to read, download, copy, distribute, print, search, or link to the full texts of the articles in this journal without asking prior permission from the publisher or the author.

Inquiries and manuscript submissions may be sent to: editor.ama@iieta.org.

Instructions for Authors (AMSE periodicals)

Except for some survey papers, the papers must be original (research, development, results). Papers should be related to Modelling and/or Simulation. Then, authors are requested to indicate (if possible) to which AMSE series their paper is intended, although Referees may suggest another choice. Submissions are in English. All contributions are assessed by Referees. Also, don’t forget to quote MS (manuscript) number in all mails (number is given at the first submission). In order to allow a correct reproduction of the paper, submissions must comply with the following requirements:

*Titles (character size being 16), and numbered section headings, should be meaningful and concise, typed in bold characters and not in capital letters; (the rest is in Times 12, or equivalent). Skip a line between title and authors and between authors and affiliation addresses.

*Authors’ names and institution full addresses must be clearly indicated. Institution addresses should be complete; they are placed below the authors’ names and before the abstract. Do not give telephone numbers. E-mail addresses are compulsory, following the institution addresses. Give the initial letter (only and always) of given names.

*An Abstract (in English) of less than 150 words must precede the text; it follows immediately (on the first page) the institution addresses. Then Key Words should be indicated [between abstracts and text].

*Text follows immediately (on the first page) key words. Recommended full size for the text is 10 to 20 pages. Papers should be justified and organised in one column. The text must be typed (“Camera Ready”), on standard A4 size (21x29.7 cm). Finally, papers will be reduced, by the Editor (for the printed journals), to A5 format (beware of small characters). Font must be Times 12 (or equivalent size for the characters). Don’t use colours; papers are printed in black and white only. Use 1.5 spacing between the lines. The text must be about 17 cm width and 25 cm high with almost equal margins (margin will be slightly increased at the top of the first page: 4 cm); thus, margins should be set as indicated: right = 2 cm, left = 2 cm, top = 2.7 cm, bottom = 2 cm. Also, a (good) discussion and a conclusion are expected. Conclusion and discussion should not be in the same section. Please, number the pages (bottom of page).

*Tables and figures, with their captions (in normal font), are included in the text at the correct place and receive numbers, which appear in the text. Photographs (and colours) should be avoided. Don’t make too small figures with too small indications (the publisher reduces the format from A4 to A5 before printing).

*All Footnotes should be placed at the end of the paper, sorted by their reference number.

*A good care in the References must be introduced. Each citation must begin on a new line using the following format: Authors’ family names (preceded by the initial letter of the given name); Title, Year; THEN: Publisher, City, Country (for book) OR journal name, volume, pages, (for journals). Also, for conference proceedings indicate the place (town, country), the date (month, year), the meaning of acronyms (if any) and the pages of the paper in the proceedings (the reader should have access to the information if needed). References must be up to date and a minimum of 10 references is expected. Bibliography follows immediately the conclusion (or possible acknowledgements). Also, don’t forget to cite AMSE papers in the references; this is necessary for our recognition.

*Postal address: (if needed): AMSE Secretary/ 14 Avenue Berthelot/ 69 007 LYON (FRANCE)

Do not send special delivery mail, such as registered mail, to this address.

*Copyrights: In case of acceptance, copyrights are transferred to AMSE (see website).

*Submission: Papers can be submitted for regular processing or for electronic processing (indicate your choice).

Papers should be sent (electronic paper: Word 2003 recommended) to the General Secretary’s e-mail address:

Dr C. Berger-Vachon: cbv@univ-lyon1.fr

-Regular processing: papers will be printed and posted to Referees (the Editorial Committee will find the referees).

-Electronic processing (accelerated reviewing): please suggest 4 RELIABLE referees and indicate their electronic and postal addresses, not from your university, and one at least should not be from the main author’s country; please make sure the Referees will accept the reviewing if requested. Finally, two referees will be selected among them.

*AMSE website: www.amsemodelling.com

Important information from AMSE Board about periodical publication:
Many letters to AMSE deals with the following topic. So, let us make a statement about it.
Publications in AMSE journals are free of charge. Consequently, people working for AMSE are volunteers and they must do , first, their compulsory duties in their institutions.
This may lead to some delay in handling AMSE mail and submissions. The following delays should be regarded as normal:
*Acknowledgement letter (after a submission) : 1½ to 2 month,
*Reply from the Referee: another 4 months.
Unfortunately, sometimes, Referees forget to answer and added recalls have to be done lengthening the procedure and making AMSE work much heavier and the delay longer. And, finally, in the worst case, no reply come after the recall and the paper is taken by the AMSE Board; this is exceptional and really unfair and unpleasant.
After acceptance, papers are forwarded to Spain for printing. Contents of edited journals are indicated on our website.
So please, don't send information requests within these periods (mostly with repeated e-mail messages) as it may even more lengthen the delays.
Thank you for your collaboration and for accepting these rules which help our community to publish at a low cost
The General Secretary

Hints:
We strongly suggest you regularly check your spam folder for AMSE notifications. Update your 'Safe Senders' list to ensure that emails from AMSE are not filtered into your spam folder.

Are you a new AMSE user? Please select register from the section USERS at the top and enter the requested information.

Are you an existing AMSE user? If you are already registered as an author or a reviewer, please do not register again. Enter at the top your username and password and then click the appropriate log in button. If your email or other address details change, you can update your AMSE account by selecting "Modify my User's Data" after you log in, from the section USERS.

Are you an author and reviewer for our journal? You will be able to perform both these activities with your AMSE account. Select log in from the menu at the top and enter your username and password, and select "My Articles in process" or "Articles for review" from the section PUBLICATIONS at the top and access the requested information.

Have you previously registered on this site but now forgotten your password? Simply click "I forgot my password" at the top. Enter your email address in the popup window that appears and click "Remember Password". AMSE will then email you your username and password.

Do you wish to change your username or password? Simply log in to AMSE and select "Modify my User's Data", from the section USERS.

Browse in this journal:

Volume 55 / Issue 4 / 2018

Volume 55 / Issue 3 / 2018

Linear Fresnel plant with primary reflectors movable around two axes Pag. 99
Mario A. Cucumo, Vittorio Ferraro, Dimitrios Kaliakatsos, Marilena Mele, Francesco Nicoletti
Energy production and carbon sequestration in wet areas of Emilia Romagna region, the role of Arundo Donax Pag. 108
Giulio Allesina, Simone Pedrazzi, Fabrizio Ginaldi, Giovanni A. Cappelli, Marco Puglia, Nicolò Morselli, Paolo Tartarini
A CCHP system fed by low enthalpy sources in Mediterranean area Pag. 114
Vincenzo La Rocca, Massimo Morale, Giorgia Peri, Gianluca Scaccianoce
From GREen ENErgy to green LOGistic: A joint analysis of energy, accessibility and mobility Pag. 121
Antonello Croce, Giuseppe Musolino, Corrado Rindone, Antonino Vitetta
Summer mitigation strategies in an urban renovation area in the south of Italy Pag. 128
Paola Lassandro, Silvia Di Turi, M.G. Perrini
Study of an integrated retrofit system for energy positive buildings in urban areas Pag. 136
Francesco Ruggiero, Silvia Di Turi, Angelina Mastrorilli
Graphene-based derivative as interfacial layer in graphene/n-Si Schottky barrier solar cells Pag. 144
Andrea Gnisci, Giuliana Faggio, Giacomo Messina, Laura Lancellotti, Eugenia Bobeico, Paola Delli Veneri, Andrea Capasso, Theodoros Dikonimos, Nicola Lisi
Testing a model of flow and heat transfer for u-shaped geothermal exchangers Pag. 151
Josephin Giacomini, Maria C. Invernizzi, Pierluigi Maponi, Massimo Verdoya
Supporting decision methodology for the refurbishment of buildings: Optimization in nZEB perspective Pag. 158
Alice Bellazzi, Benedetta Barozzi, Giulia Guazzi, Italo Meroni
Parametric simulation analysis of a centralized solar heating system with long-term thermal energy storage serving a district of residential and school buildings in Italy Pag. 165
Giovanni Ciampi, Antonio Ciervo, Antonio Rosato, Sergio Sibilio, Anna Di Nardo
Urban densification and energy efficiency in smart cities: The Verge project (Switzerland) Pag. 173
Alessandra Barresi
Design of heliostat field for an unfired solarized micro gas turbine in a closed cycle with mass flow control regulation Pag. 177
F. Rovense, M. Bomentre, M.S. Silva, V. Ferraro, M. Amelio

Volume 55 / Issue 2 / 2018

Volume 55 / Issue 1 / 2018

Volume 54 / Issue 4 / 2017

Volume 54 / Issue 3 / 2017

A New Approach to Community Detection in Complex Networks by Using Memetic Algorithms Pag. 384
Ali Ghorbanian, Mehdi Neyestani (Iran)
Recruitment of Personnel in a Bank Using AHP-FLP Model Pag. 407
Trupti A Thakre, Onkar K Chaudhari, Nita R Dhawade (India)
Some aspects of Equivalence Picture Fuzzy Relation Pag. 424
Palash Dutta, Kuntal Saikia (India)
ANN and RSM Modeling Methods for Predicting Material Removal Rate and Surface Roughness during WEDM of Ti50Ni40Co10 Shape Memory Alloy Pag. 435
Hargovind Soni, S. Narendranath, M. R. Ramesh (India)

Volume 54 / Issue 2 / 2017

Medical Diagnosis via Distance Measures on Picture Fuzzy Pag. 137
Palash Dutta (India)
Analysis of the Responses to Typical Electromagnetic Excitations in TD-AEM Systems Pag. 153
Bing Guo, Yiming Zhang (China)
Design and Evaluation of Text Pre-Processor: A Tool for Text Pre-Processing Pag. 169
Amit Prasad Rauth, Anjan Pal (India)
Multi-task Incentive Contract with Specific Task Ability Pag. 185
Chunping Wang, Hua Liu (China)
FPGA Implementation of Arcsine Function Using CORDIC Algorithm Pag. 197
Anurup Saha, Archisman Ghosh, K. Gaurav Kumar (India)
Optimal Pricing and Admission Control of Markovian Queueing System with Negative Customers Pag. 203
Zaiming Liu, Wei Deng, Gang Chen (China)
Effective Software Project Estimation: An Excel Based Approach Pag. 221
Gopinath Saha, Rachita Ghoshhajra (India)
Research on Evaluation of E-commerce Implementation Effect for Small and Middle-Sized Enterprises Pag. 230
Jing Li, Qiaolun Gu, Yong Yang (China)
Trading in Indian Stock Market Using ANN: A Decision Review Pag. 252
Sasmita S. Choudhury, Moumita Sen (India)
Game Theory-Based Supplementary Collection Strategy for Industrial Buyers in a Local Agricultural Biomass Market Pag. 263
Jinling Sun, Juan Pang (China)
Alpha Normal Distribution and Its Application in China’s Logistics Prosperity Index Pag. 278
Xiaheng Zhang, Ronggang Zhang, Lingling Li (China)
Research on Effect of Public Education Policy on Economic Growth in China Based on Human Capital Accumulation Model Pag. 290
Hang Fang, Yujing Chu (China)
Composition Operator from Weighted Bergman Space to Logarithmic Bloch Space on the Unit Polydisc Pag. 310
Qiuhe Huang (China)
A Result of Convergence about Weighted Sum for Exchangeable Random Variable Sequence in the Errors-in-Variables Model Pag. 322
Mei Yang (China)
A New Calibration Method for Binocular Camera Based on Fundamental Matrix & HEIV Model Pag. 333
Hui Ma (China)
The Effect of Risk Preference on Two Crowdsourcing Mechanisms Pag. 346
Kunxiang Dong, Zongxiao Xie, Jie Zhen, Xiukun Zhao (China)
Continuous Mappings and Fixed-Point Theorems in Probabilistic Normed Space Pag. 360
Gaoxun Zhang, Honglei Zhang (China)
New Practical Determination of Non-Singular H-Matricesr Pag. 373
Chunyu Yang, Shuping Pan (China)

Volume 54 / Issue 1 / 2017

Volume 53 / Issue 2 / 2016

Mathematical relationship between dependent and independent parameters of operators working on rock drill machine by dimensional analysis Pag. 1
Sudhir Vinayakrao Deshmukh, Suresh Gulabrao Patil (India)
Coordination of the supply chain of seasonal products with buy-back contract under weather sensitive demand Pag. 18
Hongyong Fu, Wei Chen, Han Song Huawei Peng (China)
Indexing DNA sequence k-mer based on LNDM algorithm Pag. 34
Pinchao Meng, Weishi Yin, Zhixia Jiang (China)
On the Cauchy problem for three-dimensional generalized Zakharov equations Pag. 48
Shujun You, Xiaoqi Ning (China)
Evolutionary analysis of the trust relationship in the strategic emerging industry clusters based on complex network Pag. 60
Li Xing (China)
A novel nonnegative subspace learning approach for unsupervised feature selection Pag. 78
Wei Zheng (China)
Research on cooperation innovation among enterprises in the strategic emerging industrial cluster Pag. 93
Li Xing (China)
Analysis of the relationship between precipitation and runoff based on smoothing-window-based dependence structure entropy Pag. 108
Ru Hao, Xin Chang (China)
The evaluation analysis of tourism public service based on the grey matter element method Pag. 123
Yong Ding (China)
The theoretical research of wake bubble light scattering characteristics Pag. 135
Jiali Zhang (China)
The mathematical forecast model of Shandong GDP and the analysis of its influencing factors Pag. 150
Yanjun Li (China)
The evolutionary game study of knowledge transfer behavior in cooperative crowdsourcing community of innovation Pag. 164
Juan Xue, Chang Q. Ding, Jing Yuan (China)
Research on the technical efficiency and influencing factors of information service industry in China Pag. 176
Jiguang Gu (China)
The transport environment risk evaluation research of missile container based on grey clustering Pag. 188
Guang Wang (China)

Volume 53 / Issue 1 / 2016

Product market competition and optimal voluntary disclosure policy——A Betrand duopoly perspective Pag. 1
Hao Peng, Cunzhi Tian,Chunping Wang (China)
Global solution and stability analysis of constant delay stochastic differential equation Pag. 17
Chunlian Wang, Shanxiang Zhang (China)
Research on synergetic pricing strategy of cloud-closed; Loop supply chains Pag. 30
Minglin Jiang, Xiaowei Lin, Haiping Ren (China)
The optimization of Ningbo Zhoushan port container sea-rail combined transportation network routes Pag. 47
*Guiyun Liu, *Huijun Wu China)
Spurious regression of time series with shifts in variance Pag. 60
Ming-Hua Wu (China)
On global generalized solution for a generalized Zakharov equations Pag. 73
Shujun You, Xiaoqi Ning (China)
A new similarity measure-based MADM method under dynamic interval-valued intuitionistic fuzzy environment Pag. 84
Laijun Luo, Hiping Ren (China)
Informationally efficient mechanism for the augmented inner product Pag. 93
Chunping Wang, Cunzhi Tian, Zixiang Xia (China)
Optimal model of toll public road with management cost Pag. 116
B. Shang, Y. H. Zhu (China)
Reform on mathematical modelling teaching contents in the era of big data Pag. 129
Li Wei, Li Qiong (China)
A co-evolutionary particle swarm optimization with dynamic topology for solvingmulti-objective optimization problems Pag. 145
Daqing Wu, Lixiang Tang, Haiyan Li, LiJun Ouyang (China)
On global generalized solutions for a two-dimensional generalized Zakharov equations Pag. 160
Shujun You, Xiaoqi Ning (China)
Bayesian estimation of reliability of geometric distribution under different loss functions Pag. 172
Wenbo Yu, Jinyun Xie (China)
Fuzzy TOPSIS-based supply chain optimization of fresh agricultural products Pag. 186
Shi Haoran, Liu Kejian, Peng Haihua,Yao Yang (China)
A new similarity measure of intuitionistic fuzzy set and application in MADM problem Pag. 204
Laijun Luo, Haiping Ren (China)

Volume 52 / Issue 1 / 2015

Volume 51 / Issue 1 / 2014

Other issues

      Copyright © AMSE 2017   I   Terms & Conditions   I   Privacy Policy